Cold Steel 16JSM Trail Master Fixed 9-1/2" VG-1 San Mai III Blade, Kray-Ex Handles, Cor-Ex Sheath
CS16JSM: 16JSM Trail Master San Mai III
Why buy a Trail Master®?
That's simple. Because it is, without a doubt, the most knife for the money ever commercially built! In terms of sharpness, edge holding and strength, it will out perform "by a wide margin" any factory made knife we know of and 99% of all hand forged knives as well! We know we're "going out on a limb" with that statement, but since 1987 we have challenged the industry to make a better knife and yet, to this day, we've had no takers. So before you spend your hard earned bucks on one of our competitor's knives, take a moment to review all the advantages offered by the Cold Steel® Trail Master.
Style and Construction:
The broad clip point of the blade is extremely resistant to bending or breaking. This is largely due to the fact that the tip is actually thicker near the point than what is seen on our competitor's knives. This, however, does not mean that the point is dull or blunt. On the contrary, the point is almost needle sharp and offers tremendous penetration. Plus, the blade-back is equipped with a slightly concave false edge that measures approximately three and a half inches long. Every Trail Master's® edge has been honed by hand, then given a high speed buff until it is truly razor sharp and capable of easily shaving the hair off one's arm. This knife is so sharp it will cut at the slightest touch. The Trail Master® balances approximately 3/4" in front of the guard for a slightly blade-heavy feel that is ideal for delivering heavy chopping and slashing strokes. The Trail Master's® Kray-Ex™ handle is 5" long and deeply checkered for a non-slip, shock absorbing grip. What's more, its contoured cross section helps prevent the knife from shifting or turning in the hand when striking full power blows. The double guard is very study and rigidly fixed into place. It is long enough to keep fingers off the blade, yet short enough to avoid being tangled in clothing or equipment when the Trail Master® is drawn.
VG-1 San Mai III® blade:
If you want a Bowie knife that requires minimum maintenance and is practically immune to water, salt, air, or the humidity of a jungle environment, the VG-1 San Mai III® Trail Master® is for you! This Bowie will outperform any other stainless steel Bowie in the world in terms of strength and toughness. And, as an added bonus, this Trail Master® is equipped with a beautiful rolled edge, capable of easily severing 4" or more of free hanging manila rope!
Information from Cold Steel.
- Blade Length: 9 1/2"
- Overall Length: 14 1/2"
- Steel: VG-1 San Mai III®
- Weight: 17.5 oz
- Blade Thickness: 5/16"
- Handle: 5" Long Kray-Ex™
- Sheath: Cor-Ex Sheath
- Made in Japan
UPC Code: 705442001805
The exotic steel Capital of the World, Japan produces and innovates some of the best products, from pocket to kitchen knives and everything in between.
A nylon polymer that is lightweight and extremely durable, Zytel can be shaped and textured to provide excellent grip.
KA-BAR 1277 Large Heavy Bowie 9" Bl…
Cold Steel 39L16CT Trail Master 9-1…
Down Under Knives The Outback Hunti…
Svord VTB Von Tempsky Bowie Knife 1…
Cold Steel 88CSAB 1917 Frontier Bow…
Condor Tool & Knife CTK1005-11HC Du…
Boker Magnum Giant Bowie Fixed 8-1/…
SOG FX-01 Fixation Bowie Knife 7" P…
Boker Bowie Standard Fixed 7-3/4" B…
Cold Steel 39LSWB Marauder 9" Bowie…
SOG FX-10 Fixation Dagger 7" Blade,…