Hardcore Hardware Big Field Knife 6.7" Black D2 Sawback Blade, G10 Handles, Cordura MOLLE Sheath - BFK01-G

Part Number: HHBFK01G
Manufacturer: Hardcore Hardware Australia

Discontinued

This product is no longer available
Description
HHBFK01G: Big Field Knife G10
Hardcore Hardware Australia
 
The BFK01-G (Big Field Knife G10) is intended for deployment by various infantry & Special Forces units. Designed for the extreme end of hard use, typical duties the BFK01-G may encounter include light bush/path clearance, splitting wood, entrenching and heavy cutting. 

This tool features an extraordinarily strong modified Tanto point and 7 mm full tang thickness to mitigate stress from aggressive penetration, prying & digging. Hardcore serrations along its spine facilitate chopping/sawing and an area rearward of the point is designed for hammering. The pommel of the BFK01-G has a chisel point for prying or break glass. 

Constructed entirely from D2 Tool Steel, the BFK01-G has a durable Teflon coating and G10 textured handle, secured with Torx screw all steel fitting. 

Hardcore Hardware overt carry systems are designed to integrate specifically with most popular assault platforms and utilise the Molle attachment system as the primary method of retention to the body or gear. Hardcore Hardware uses only MILSPEC fittings and materials in the manufacturing of the BKF01-G carry system. 

They understand that you may require handle up or down carry. In consideration of this and to ensure fail-safe retention in any situation, this slimline profile carry system has two Velcro straps that fasten below the pommel and above the hand guard. All knife carry systems feature a secure Kydex insert for the blade.
Specifications
  • Blade Length: 6.7" (170 mm)
  • Blade Steel: D2 Tool Steel
  • Blade Width: 1.4" (36 mm)
  • Thickness: 7 mm
  • Finish: Black Teflon
  • Overall Length: 12" (305 mm)
  • Handle Material: Black G10
  • Sheath Material: Cordura with Kydex Blade Insert
  • Weight: 15.7 oz. Knife Only, 1 lb. 5.1 oz. with Sheath (600 g)
  • Made in Australia

UPC Code: 420360

D2 Tool Steel
D2 Tool Steel
This is a high carbon steel that is appropriate for use in hostile environments and is known for edge retention.
G10 Handles
G10 Handles
Formed in a sheet under high pressure by combining fiberglass and an epoxy resin binder. These handles are lightweight and shaped to ensure a solid grip.

© 1995-2014 by Howard Korn and KnifeCenter Inc. All rights reserved.

5201 Lad Land Dr, Fredericksburg, VA 22407 - 800.338.6799 (Phone Orders Welcome)