Sentry Solutions Tuf-Cloth Jar, 12" x 12"
SY91011: Tuf-Cloth Jar (12" x 12")
Tuf-Cloth applies a water-displacing, micro-bonded crystal barrier to protect against rust, friction, and wear in any condition, for all of your firearms and metal equipment. Tuf-Cloth provides superior protection compared to any oil or silicone based products against moisture; including extreme conditions and environments! Tuf-Cloth’s 12” by 12” lint-free fabric makes oil rags and disposable wipes obsolete. Tuf-Cloth can be used again and again, literally hundreds of uses, just return Tuf-Cloth to the vapor barrier jar and re-seal it. If your Tuf-Cloth does dry out, simply restore it to its previous condition by using a touch of Tuf-Glide™; a partner for Tuf-Cloth using the same quick-drying mineral spirit carrier. With one simple swipe of the Tuf-Cloth, your outdoor gear is properly lubricated and protected from rust. Issued and used by more than 60,000 troops to replace CLP during operations in Afghanistan and Iraq.
How it works
Wiping with TUF-CLOTH gives you cleaning, rust protection and lubrication. Pure mineral spirits is the fast drying carrier for the active ingredients, so TUF-CLOTH cleans as it transfers the lubricants and protectants to all surfaces of your gear for 100% protection. It evaporates, and Sentrys proprietary ingredients bond to the surface; this bonding assures long-lasting effectiveness.
TUF-CLOTHs waterproof protection will not wash off or thicken in the cold (even down to -40°F/-40°C). It is dry to the touch so will not attract dirt like oil-based products, nor does it leave a slippery film like silicone. It is safe to use on wood and most plastics. TUF-CLOTH is user-adjustable; either by drying in air or adding pure mineral spirits. A wetter cloth applies a thicker shield of protection that dries more slowly. The excess can be buffed off after it is dry without compromising performance.
A dry TUF-CLOTH makes a terrific polishing cloth; it beautifies wood and gives blue metals a deep luster. Use TUF-CLOTH to protect equipment, firearms, knives, wood and all metal components. It maintains its effectiveness even when it is wet with water, and it will not harm most plastics.
Directions for use
If surfaces to be protected are very dirty, grimy or oily, best performance will be achieved if the surface is cleaned before using TUF-CLOTH. This helps bonding of the active ingredients and prevents contamination of your TUF-CLOTH.
Clean surfaces well.
Rub surfaces firmly with TUF-CLOTH.
Drying time depends on thickness of coating/dampness of cloth. If cloth dries out add TUF-GLIDE or pure odorless mineral spirits (not turpentine) to restore its original feel. If item is exposed to saltwater: rinse with fresh water, dry and re-wipe with TUF-CLOTH. Return cloth to its special vapor-barrier pouch and seal tightly for longer life.
Use frequently if item is exposed to wear or stored outdoors.
For hard-to-reach areas use with Sentrys Solutions Award Winning TUF-GLIDE.
Contains mineral spirits. Wash hands after using. Keep away from children.
This product is USA born and raised.