Sentry Solutions Armorer's Kit Deluxe - Gun Cleaner (91101)
OIL-FREE Performance. Treats 30 or more firearms, inside and out. Upgrade the performance of your firearms with a better way to lube. Non-stick oil-free surfaces repel fouling, powder residue and dirt. Guns stay cleaner, more reliable and accurate over more rounds – in any temperature and weather.
- Enhances Accuracy
- Eliminates Grime
- Tunes Triggers
- Stops Rust
- Smoothes Actions
- Heavy duty rust protection for extreme conditions and long term storage
TUF-CLOTH™ 30cm x 30cm 12" x 12": Revolutionary upgrade from oil and silicone rags; delivers oil-free lubrication and protection for today's firearms, knives, tactical gear and collectibles. Quick clean on your gun bench, the range or in the field. Spill-proof pack; long-lasting, lint-free impregnated cloth.
- Slick action in any temperature – won't thicken from cold or thin out from heat
- Stops rust
- Micro-bonded shield
- Displaces moisture
- Gives metal a non-stick barrier
- Grit-free reliability
- Great for all conditions, metals & finishes, safe for wood and plastic
- Prevents fingerprint damage, tarnishing & dulling
TUF-GLIDE™ 14ml/1/2oz Needle applicator: Oil-free lubrication and rust protection for hard to reach areas of firearms and gear. Use with TUF CLOTH, for 100% oil-free protection.
MARINE TUF-CLOTH™ 30cm x 30cm 12" x 12": Developed on request from Navy SEALs. Based on TUF-CLOTH but formulated with additional ingredients to enhance protection against highly corrosive saltwater and high humidity.
MARINE TUF-GLIDE™ 14ml/1/2oz: Oil-free lubrication and rust protection for hard to reach areas of firearms and gear in extreme conditions, marine use and long term storage. Use with MARINE TUF CLOTH, for 100% oil-free protection.
SMOOTH-KOTE™ 14ml/1/2oz. Needle applicator; 56ml/2oz: Innovative replacement for gun oils and CLP's. Fast-drying firearms lube and bore treatment. Protects internal surfaces against friction, fouling, and wear. Micro-bonds to metal for excellent lubrication from -54ºC/-65ºF to 343ºC/650ºF.
- Non-stick shield repels dirt, eliminates grime
- Extreme fouling reduction enhances accuracy, bullet velocity and reliability
- Bore treatment without the buildup, no need to adjust charge weight
- Aids in barrel break in by reducing the number of rounds needed for the break in process
- Makes cleaning your gun simple, just brush off and re-lube
HI-SLIP GREASE™ 12 cc. Syringe: Lubricates, waterproofs-prevents rust, even in saltwater. All the benefits of oil but stays put – will not migrate from -54ºC/-65ºF to 343ºC/650ºF. Synthetic blend exceeds mil-specs for moly grease. Lubricates and prevents galling on all types of metal- stainless steel, blued metal, titanium and aluminum. Prevents corrosion from salt water, powder residue, sweat. Concentrated and extremely long lasting- a little goes a very long way.
- Excellent for silky smooth actions
- Great for locking lugs, easier lock-up
- Prevents galling even under high loads and extreme conditions
- Aids gunsmiths and knifemakers in assembly tasks- holds springs and washers in place
BP-2000 POWDER™ 3 grams/0.1 oz: Unique dry lubricant for trigger jobs, fine-tuning feed ramps, bores, bolts and slides. Made for the enthusiast, competitor and gunsmiths needing maximum lubricity. Made from pure powdered, passivated molybdenum disulfide with natural micro-bonding to metal. Works on all types of metal.
- Reduces coefficient of friction, smoothes and lightens trigger pulls- great on sears, trigger bows
- When used with SMOOTH-KOTE, friction is reduced by as much as an additional 20%, compared to oiled surfaces
- Gets rid of trigger creep for the crispest release
- Aids barrel break in by reducing the number of rounds needed for the break in process
- Oil-free and dry surfaces are non-stick – clean by brushing off and re-lubing
PLUS accessories to treat your firearms, including detailed instructions, application brush, patches, lint -free foam & cotton-tipped applicators, pipe cleaners, alcohol pads and gloves.
How It Works
Armorers Kit Deluxe provides users with the latest in dry lubrication technology that enhances ballistic performance of firearms as it cleans and protects.
Sentry Solutions products use molybdenum disulphide, proprietary lubricants and corrosion inhibitors to lubricate and protect metal surfaces at the microscopic level thus preventing gear from becoming the dust magnets as seen with oil products.
Ensure firearm is unloaded and free of any ammunition. Clean all surfaces of oil, powder/metal residues, rust, dirt, etc. using cleaners such as Gun Scrubber, Quick Scrub, alcohol or other solvents that does not leave a residue. Detail stripping, if possible, is recommended. Allow cleaned surfaces to dry. If any residue is visible rinse surface with rubbing alcohol or similar.
Stir/mix SMOOTH-KOTE thoroughly. Apply SMOOTH-KOTE, one thin coating, to all interior surfaces, including bore. Use brush, cotton applicators, dipping or spraying, etc. To treat the bore apply SMOOTH-KOTE to a clean patch on a tight fitting jag and run it down the bore. One thin coating is what you want. The coating will dry in 2 or 3 minutes and cure in 2 hours at room temperature or when dry you can apply heat for 2 minutes with a hair dryer or similar. For quick clean up of SMOOTH-KOTE use alcohol pads.
Use BP2000 POWDER to fine tune surfaces , such as trigger parts, rails and bolt, etc. Use a patch, pipe cleaner or applicator to rub BP2000 vigorously into the surfaces. BP2000 Powder may be used on its own or in combination with SMOOTH-KOTE or TUF-CLOTH, where BP2000 Powder is applied after the surfaces are dry. Different effects will result from different combinations- for example a double action hammer and sear trigger pull may be lightened up to 20% + when compared to that same trigger being lubricated with oil.
Use HI-SLIP GREASE sparingly (a spot of grease about the size of a pin head) on high load or wear points such as locking lugs and the upper surface of hammer strut springs. HI-SLIP GREASE may be also be used on slide rails and similar, wipe any excess off with a clean patch or similar.
Use TUF-CLOTH to wipe exterior of firearm, magazines and magazine-well. To maintain firearm, after firing sequence, unload & inspect. Firearm can be cleaned with a dry, nylon-bristle brush.
To maintain your gun after your course of fire: use a dry nylon bristle brush to clean surfaces & bore. A clean patch can be used in the bore. Then touch-up wearing surfaces and bore with SMOOTH-KOTE and or BP2000 Powder. Use the SMOOTH-KOTE precision applicator to touch up the wear points.
This product is USA born and raised.